Standard power supply for large capacity flake ice machine is 380V/3P/50Hz and it can be customized.
Configuration: one or more sets of Bitzer semi-hermetic screw compressor with economizer; water cooling way (air cooling or evaporative cooling is also suitable for special condition.)
Installment: all equipment except the cooling tower are installed on one steel frame so it is very convenient to install on spot and can be put into use immediately after hooking it up to the water resource and electricity circuit. The cooling method of the condenser can be customized.
Application: industrial concrete mixing project, artificial skiing ground, etc.
Features
- Low investment, energy saving and low operational cost
- Environmentally friendly and highly efficient
- Full automatic design, accurate design, low fault rate and minimum maintainance cost.
- The environment-friendly design decreases energy waste and greenhouse gas emission(A21E).
- Excellent sales service and strong technical support
Large capacity flake ice machine technical parameter
Model |
Capacity |
Refrigerant |
Electricity consumption |
Installment power |
Operating weight |
Dimension |
-- |
Ton/D |
-- |
Kw |
Kw |
Kg |
mm |
FIM-250W |
25 |
R22/R404A |
78.85 |
95 |
4500 |
4200×2000×3050 |
FIM-300W |
30 |
R22/R404A |
102.45 |
125 |
Unit:2800 |
2800×2200×2200 |
Evaporator:4500 |
2400×2000×3000 |
FIM-350W |
35 |
R22/R404A |
115.35 |
140 |
Unit:2800 |
2800×2200×2200 |
Evaporator:4600 |
2400×2000×3200 |
FIM-400W |
40 |
R22/R404A |
147.35 |
180 |
Unit:3000 |
2800×2200×2200 |
Evaporator:5500 |
2800×2400×3600 |
FIM-500W |
50 |
R22/R404A |
176.30 |
220 |
Unit:3200 |
2800×2200×2200 |
Evaporator:6500 |
3000×2500×4500 |
FIM-600W |
60 |
R22/R404A |
214.90 |
280 |
Unit:4500 |
3400×2200×2200 |
Evaporator:6500 |
3000×2500×4500 |
Standard condition: Dry ball temperature is 33 ℃ and water inlet temperature is 20℃. |
Focusun Large Capacity Flake Ice Machine: